What is a 406 Ford engine?

Table of Contents

The 406 was the way that Ford got from the 390ci engine that was its main big block workhorse thought the 1960s to the 427 (and later 428) which were the high line performance engines at Ford during the Total Performance era. Basically it was a bore change that took the 390 to 406ci.

What engines came in a 1963 Ford Galaxie?

ENGINES The Galaxie 500XL came with a standard F-build code 260-cu.in. V-8, which used a 3.80 x 2.87-inch bore and stroke, 8.7 compression and a 2-bbl., 270 cfm Holley carburetor to make 164hp at 4,400 rpm and 258-lbs. ft. of torque at 2,200 rpm.

How do I identify a 406 Ford engine?

406 was a larger bore block with a 390 stroke crank. you can verify the stroke by measuring the piston travel through the spark plug hole, will be 3.75 inches. look for casting numbers on the block on the lower right side that will start with one letter followed a number ie CXXX .

What motor came in a 1963 Ford Galaxie 500?

The 1963 Ford Galaxie 500 XL has a 390 cubic-inch V8 engine under the hood paired with a 4-speed manual transmission. The car has emblems on the front fenders that call out a 427 V8 engine, but those are just for show as the seller says the engine is the 390 cubic-inch V8 mentioned.

How do I identify my Ford engine block?

Numbering Convention Ford’s part number convention generally follows the format of a four digit casting code, followed by a four digit basic part number, which will be “6015” for an engine block, followed by the revision version.

What does Fe mean on Ford engines?

Ford Engine
FE (which means “Ford Engine,” not Ford-Edsel, nor Ford Engineering) variety comes from a broad selection of bore and stroke sizes to achieve cubic-inch displacements.

How big can you bore and stroke a Ford 460?

See all 20 photos Ford 429 and 460 blocks share the same 4.36-inch bore diameter but juggled stroke to get 429 (3.59-inch stroke) or 460 (3.85-inch stroke) cubic inches. Any healthy 429 or 460 block can be made into our 501 with a 0.0305-inch overbore and 4.3905-inch bore diameter.