How can I improve my flue draw?

How to Increase Draft in Your Chimney

1. Start with a Hot, Fast Fire. Starting a cold wood stove with a hot, fast fire will get the draft going the quickest.
2. Burn Extremely Low Moisture Wood.
3. Improve Airflow Around the Fire.
4. Warm the Chimney Flue.
5. Provide Enough Air to Replace the Air That is Lost.

How can I improve my wood stove draft?

Open the door on the stove while it’s burning. Now open a window about 2 inches. If you see the flame or coals brighten, or smoke is pulled away from the door to the inside of the stove, you’ve improved the draw. After the fire is going brightly, you may then be able to close the window a bit or even all the way.

Why is my log burner drawing too much?

Ensure that the ash pan and ash pan door are closed and sealed properly. Additional air can be drawn into the fire from this area causing the fire to burn much more quickly than would be desired. Check your fuel. Soft wood will burn faster than hard wood.

How do you stop a downdraft in a wood stove?

Reverse the downdraft by increasing the air pressure in the room with the wood stove. Open a window before you light the fire. Turn off appliances with fans that draw air out of the house, including the clothes dryer, kitchen range hood and bathroom fans.

How do you make a wood fire draw better?

11 Quick Ways To Help Improve The Draw On Your Open Fireplace

1. Have The Chimney Swept.
2. Open Any Air Vents Or Windows.
3. Fully Open The Damper.
4. Leave Glass Doors Open Before Each Fire.
5. Prime The Chimney Flue.
6. Build A Fire Using The Top-Down Method.
7. Use Low Moisture Content Logs.
8. Burn Smaller, Hotter Fires.

Why does my wood stove keep back drafting?

The hot backdraft happens when a low fire is burning and the flue gases in an outside chimney are cooled to the point where draft collapses and smoke begins to seep from the stove. Once smoke begins to leak from a stove in that situation, a full hot backdraft can follow quickly.

Why is there a draft coming down my chimney?

A chimney that isn’t sized correctly will lead to fireplace draft issues. This problem most commonly arises when a gas insert is installed and the liner is not properly sized or insulated for the new upgrade.

Why does my wood stove smoke when the wind blows?

When the air pressure in your home is lower than the air pressure outside, air will seek to find a way into your home. When air comes into the home via the stove pipe and brings in smoke, this is known as backdrafting.