How do I download AHCI drivers?

4. Install or update drivers for Standard SATA AHCI Controller

1. Press and hold the Windows key on your keyboard, then press R.
2. Type in “devmgmt.
3. Expand the “IDE ATA/ATAPI controllers” category.
4. Right-click on each of the listed items in this category, then select “Update driver.”

How do I find my SATA AHCI controller?

Press the Windows key and R key together to open the Run dialog. Type devmgmt. msc in the box and click OK to continue. In the Device Manager window, expand the IDE ATA/ATAPI controllers and select the Stand SATA AHCI Controller.

How do I install AHCI?

In UEFI or BIOS, find SATA settings to select the mode for memory devices. Switch them to AHCI, save settings and restart the computer. After the restart, Windows will start installation of SATA drivers, and when it is over, it will ask you for another restart. Do it, and AHCI mode in Windows will be enabled.

What is SATA AHCI controller driver?

Advanced Host Controller Interface (AHCI) is an interface specification that allows the storage driver to enable advanced Serial ATA (SATA) features like Native Command Queuing and hot swap.

Do I need to install AHCI driver?

Yes, you need to install the AHCI drivers.

How do I update my SATA controller driver?

1 Answer. Run it and see if it installed the AMD SATA Controller driver in Device Manager under “IDE ATA/ATAPI Controller”. If it didn’t, go to the Standard SATA AHCI Controller to “Properties” and click on Update Driver. Direct it under search to the C:\AMD Chipset folder in the Root Directory.

How do I install SATA drivers?

Installing Windows using native SATA drivers

1. Boot the notebook PC.
2. Insert the Windows XP installation CD into the optical CD/DVD drive.
3. Press the F6 key when prompted.
4. Press the S key to specify the additional device.
5. Insert the SATA driver disk into drive A.
6. Follow the on-screen prompts.

How do I update SATA drivers in Windows 10?

How to Update SATA Drivers

1. Click on the “plus” (+) sign next to “Disk Drives” to see the SATA hard drive. The drive is labeled with the name of its manufacturer.
2. Click on the “Driver” tab to bring it to the front of the dialog box.
3. Click on the “Update Driver” button.

How do I enable AHCI controller?

https://www.youtube.com/watch?v=_kxBoXcVuRg