How do I connect my TP-Link TL-WA701ND?

Note：

1. Note：
2. Here we take TL-WA701ND V2 and the information below as a reference.
3. Connect the computer to the AP with an Ethernet cable.
4. Type the username and password into the boxes of the login page, the default username and password both are admin, then press Enter.
5. You will log into the TP-Link Quick Setup page.

How do I access TL-WA901ND?

Type 192.168. 1.1 (the default IP to access the admin interface) in the address bar of your internet browser to access the router’s web-based user interface. You should see 2 text fields where you can enter a username and a password. The default username for your TP-Link TL-WA901ND is admin.

How do I access my TP-link AP?

Connect a computer to the router via an Ethernet cable or wirelessly by using the SSID (network name) and password printed on the bottom label of the router. 4. Enter http://tplinkwifi.net in the address bar of a web browser. Use admin for password, and then click Login.

How do I access my TL WA801ND?

Accessing the Access Point Configuration Menu

1. Power up the access point (TL-WA801ND).
2. Manually assign a static IP address to the computer in 192.168.1.x range with subnet mask of 255.255.255.0.
3. Connect the computer to the LAN port of the access point.
4. User name and password both are admin.

How do I assign an IP address to an access point?

Log in to the access point’s web-based setup page. Launch a web browser and enter the access point’s IP address in the Address bar then press Enter. Step 2: Once the setup page appears, click the Network Setup drop-down and select Static IP.

How do I find the IP address of my access point?

How to find the IP address of an Access Point?

1. Start > Run > type: cmd (to enter command prompt)
2. Type: ipconfig /all.
3. In the list, find the line that is your “Default Gateway”, this is your primary router/access point.

What is the IP address for TL WA901ND?

192.168.0.254

How do I access my TP link AP?