Most popular

How do I enter HP Router in config mode?

How do I enter HP Router in config mode?

Configuration commands and the context configuration modes

  1. HP Switch(config)# interface c3-c6. HP Switch(eth-C5-C8)# HP Switch(config)# interface trk1. HP Switch(eth-Trk1)#
  2. HP Switch(eth-C5-C8)# HP Switch(eth-Trk1)# HP Switch(eth-C5-C8)#?
  3. HP Switch(config)# vlan 100.
  4. HP Switch(vlan-100)#
  5. HP Switch(vlan-100)#?

How do I telnet to an HP switch?

To begin a Telnet session to the switch console:

  1. Click the Configuration tab.
  2. Click Device View.
  3. Click telnet session to the switch console to open a telnet window displaying the switch’s CLI.

What is the command used to view default IP configuration on a switch?

ip default-gateway command
To define a default gateway (device), use the ip default-gateway command in switch configuration mode.

How do I enable SSH on HP switch?

How to: Configure SSH on HP ProCurve Switches

  1. Step 1: Log into the Switch. Log into the switch’s Web interface using an account with read-write permissions.
  2. Step 2: Create a Certificate.
  3. Step 3: Generate a Private/Public Key pair.
  4. Step 4: Enable SSH.

Can I telnet a switch?

Step 1 From the remote host, enter the telnet command and the name or IP address of the switch you want to access. Step 2 At the prompt, enter the password for the CLI. If no password has been configured, press Return. Step 3 Enter the necessary commands to complete your desired tasks.

How do I find out the IP address of my switch?

  1. Select the start bar in the lower-left corner, and type cmd into the search bar.
  2. Select Command Prompt.
  3. Type ipconfig/all and press Enter.
  4. Your network’s IP information should now be displayed in a list. Scroll through the list to find the following settings: IPv4 Address or IP Address. Subnet Mask. Default Gateway.

How do I find the IP address of a network switch?

How to Find All IP Addresses on a Network

  1. Open the command prompt.
  2. Enter the command “ipconfig” for Mac or “ifconfig” on Linux.
  3. Next, input the command “arp -a”.
  4. Optional: Input the command “ping -t”.

How do I enable SSH on my HP Router?


  1. In the Web UI select “General firewall” and check the enable box.
  2. Select Security Zone and click on an unused security zone.
  3. Add a policy of type “admin access”
  4. Add a description with the appropriate IP’s allowed.
  5. Check the access type box SSH.

How do I show config on HP switch?

To display the running configuration using the WebAgent:

  1. In the navigation pane, click Troubleshooting.
  2. Click Configuration Report.
  3. Use the right-side scroll bar to scroll through the configuration listing.

How do I manage my HP ProCurve switches?

How to: Configure a HP ProCurve switch

  1. Step 1: Connect your serial connection.
  2. Step 2: Conenct PuTTY.
  3. Step 3: Get the IP address.
  4. Step 4: Set time server.
  5. Step 5: Set SNMP community info.
  6. Step 6: Launch the web GUI.
  7. Step 7: Configure basic info.
  8. Step 8: Create VLANs.

How do I factory reset my HP switch?


  1. Using pointed objects, simultaneously press both the Reset and Clear buttons on the front of the switch. The power and fault lights come on.
  2. Continue to press the Clear button while releasing the Reset button.
  3. When the Self Test LED begins to blink, release the Clear button.

What is the default IP of HP switch?
The HP ProCurve Switch 1700 Series has a default IP address of 192.168. 2.10 with a subnet mask of 255.255.

How do I configure VLAN on HP switch?

Configuring basic VLAN settings

  1. Enter system view, use the command: system view.
  2. Create VLANs, use the command: vlan { vlan-id1 [ to vlan-id2 ] | all }
  3. Enter VLAN view, use the command: vlan vlan-id.
  4. Configure a name for the VLAN, use the command: name text.
  5. Configure the description of the VLAN, use the command:

How do I access the HP ProCurve 2610 switch web interface?

To access the Web browser interface you must first determine the IP address of the switch interface you are connected to. To determine the IP address from the CLI you can run the “show ip” command. The Web browser interface requires a browser that supports Java. Internet Explorer is the recommended browser.

What is the default password for HP switch?

The default username for first time configuration is admin, no password is required.

How do I assign an IP address to an HP switch?

Click on Quick Setup. In the Switch Quick Setup Parameters box, click on Change. Enter the IP address and any other information such as the Subnet mask and Gateway. Click on Save to save changes.

What is the command for IP configuration?

On a Windows computer, use the following information to release and renew your IP address: Go to “Start > Run” and type ” cmd ” (no quotes), then select “OK” Type ” ipconfig /release ” (no quotes) and press “Enter” Once the prompt returns, type ” ipconfig /renew ” (no quotes), then hit “Enter,”

What is IP address command?

First, click on your Start Menu and type cmd in the search box and press enter. A black and white window will open where you will type ipconfig /all and press enter. There is a space between the command ipconfig and the switch of /all. Your ip address will be the IPv4 address.

What is ip routing command?

The ip-route command manages static routes in the routing table. Issue this command for each static route to add to the routing table. To delete a static route, use the no ip-route command. Issue this command for each static route to delete from the routing table.

What is the CLI command of the router to show the interface status and configuration?

Router#show interfaces This command shows the status and configuration of interfaces.

How assign IP address to VLAN?

Assigning a Static Address to a VLAN

  1. In the Mobility Master node hierarchy, navigate to the Configuration > Interfaces > VLANs page.
  2. Under IPv4, select Static from the IP assignment drop-down list.
  3. Enter the IPv4 address of the VLAN interface.

What is VLAN configuration?

A VLAN is a group of devices on one or more LANs that are configured to communicate as if they were attached to the same wire, when in fact they are located on a number of different LAN segments. Because VLANs are based on logical instead of physical connections, they are extremely flexible.

How do I access the Web interface on an HP switch?

Verify the configuration Enter in the address bar, and select the certificate issued by new-ca. Then the web login page of the Device appears. On the login page, type the username usera, and password 123 to enter the web management page.

How do I reset my HP switch password?

HP E5500-24G-SFP Switch – Password Recovery

  1. Press Ctrl-B to enter Boot Menu…
  2. Before the countdown reaches 0 enter B.
  3. The timer is followed by a password prompt. The default is no password.
  4. Press Enter to display the following boot menu:

How do I reset the password on my HP switch?

Solution: You can clear the switch password by pressing the recessed Clear button on the front of the switch. This action deletes all password and user name protection from all of the switch’s interfaces.

Related Posts

How much is Kingsborough Community College a semester?

How much is Kingsborough Community College a semester? SPRING 2022 TUITION RATES RESIDENT STUDENTS NON-RESIDENT STUDENTS FULL-TIME (12-18 Credits/equated credits) $2,400 per semester $320 per credit PART-TIME (1-11…

How do you make fermented rice cakes?

How do you make fermented rice cakes? Instructions In a medium mixing bowl, add rice flour, glutinous rice flour, and mix until well combined. Pour in the ¾…

When was the first Academy Awards held?

When was the first Academy Awards held? May 16, 19291st Academy Awards / Date When the first Academy Awards® were handed out on May 16, 1929, at an…

What is DB2COPY1?

What is DB2COPY1? DB2COPY1 is the default name of the Db2 copy that is the first installation of a Db2 database product on your machine. This same name…

How do I Group clips in Pro Tools?

How do I Group clips in Pro Tools? A Clip Group is best described as a “container” in which you can put multiple clips. They’re created easily, by…

Is An American Werewolf in Paris a sequel?

Is An American Werewolf in Paris a sequel? It follows the general concept of, and is a sequel to, John Landis’s 1981 film An American Werewolf in London….