How do you program a Kwikset 264?
How do I add/delete a user code on my 264 Deadbolt?
- Enter your Programming Code.
- Press “”Kwikset”” then “”1″” then “”Kwikset””
- Enter a new User Code. It must be between 4 and 10 digits.
- Press “”Kwikset””
- Test the code: While your door is open, lock it and enter your new User Code to make sure it unlocks the door.
How do you reset a Kwikset lock 264?
Press and hold the Reset button for 5 seconds, until you hear 3 beeps and see the Kwikset button flash amber 3 times. 2. Enter the default PC (O-O-O-0).
Where is the program button on Kwikset lock?
While the door is open, press the “Program” keypad button located on the interior side of the door. Enter a four to eight digit security code that you can easily remember on the outside electronic lock keypad.
How do you reset the code on a Kwikset electronic deadbolt?
A factory reset will delete all codes associated with the lock.
- Make sure the door is open and unlocked.
- Press and hold the program button for 30 seconds using the SmartKey tool or a paper clip. You will hear one long beep.
- Press and release the program button. You will hear one short beep.
How do you change the combination on a Kwikset lock?
It is recommended that you change it to a code of your own.
- Make sure the lock is unlocked and the door is open.
- Enter your Programming Code – for new installation, default is 0-0-0-0.
- Press enter arrow. You will hear one beep.
- Press 4 .
- Press enter arrow. You will hear one beep.
- Enter a new Programming Code.
How do you change the 4 digit code on a Kwikset lock?
How do I reset my Kwikset keypad?
How do I reset my Kwikset electronic door lock?
1 Factory Reset
- Open your door.
- Extend the latch bolt.
- Slide up the cover to open the back of your lock, exposing the buttons beneath.
- Push and hold the reset button for 10 seconds, until the lock beeps.
- The light ring will flash red, then spin amber.
- The lock has now been restored and is ready to be set up again.