How do you use school bus mirrors?

Table of Contents

Outside Lower Spot or Convex Mirrors The convex mirrors are located below the outside flat mirrors. The convex mirrors should be adjusted so that you can see the entire area to the rear of the mirror along the side of the bus. You should be able to see at least one traffic lane on either side of the bus.

What is flat mirrors on a bus used for?

5) There are two side-mounted flat mirrors, one on the right side of the bus and one on the drivers side. They are used to monitor traffic, check clearances and identify students on the sides and to the rear of the bus.

What type of mirror is used on a school bus?

convex mirrors
The convex mirrors are located below the outside flat mirrors. They are used to monitor the left and right sides at a wide angle. They provide a view of traffic, clearances, and students at the side of the bus.

What is the proper adjustment for flat mirrors on a school bus?

Adjust the flat glass lenses inward and upward until the driver has a clear view along the side of the bus and can also see the rear corner marker lamp in the uppermost inboard corner of each lens. This helps to ensure the mirrors are properly adjusted to see the required 200 feet to the rear of the mirror.

How often should you check your mirrors when driving a school bus?

every 5 to 8 seconds
The mirror should be adjusted so the driver can see as much of the interior of the bus as possible. Ideally the mirror should be adjusted so the wording “emergency door” appears at the top of the driver mirror. Check mirrors every 5 to 8 seconds while driving including the interior mirror.

What are cross view mirrors?

With a unique oval shape, Hawk-Eye® crossview mirrors provide a complete picture of the front of your bus and the areas around it.

What do convex mirrors do on a school bus?

The convex mirrors are located below the outside flat mirrors. They are used to monitor the left and right sides at a wide angle. They provide a view of traffic, clearances, and students at the side of the bus.

What are the mirrors called on a bus?

4 – Outside Left and Right Side Convex Mirrors. The convex mirrors are located below the outside flat mirrors. They are used to monitor the left and right sides at a wide angle. They provide a view of traffic, clearances, and students at the side of the bus.

How many mirrors does a bus have?

13 CA ADC § 1258BARCLAYS OFFICIAL CALIFORNIA CODE OF REGULATIONS. § 1258. Mirrors on School Buses. All Type 1 school buses and Type 2 school buses constructed on and after July 1, 1970, shall be equipped with two exterior rearview mirrors, one on each side of the bus.

What are convex mirrors used for on a school bus?

What is the rule for checking your mirrors?

You simply need to glance in all three mirrors every five seconds. By doing so, you are keeping yourself aware of everything going on around you, which is the key to being a successful defensive driver. For instance, let’s just say you glance in your mirrors and notice a car coming up behind up.

What order do you check your mirrors?

Normally, you should use the interior mirror first followed by the exterior mirrors. Before carrying out any manoeuvre always check your mirrors. This includes: moving off – check all mirrors and look over your right shoulder to check the blind spot.