What capacity is Kenmore He2t?
3 7 Cu Ft
Kenmore He2t 3 7 Cu Ft Front Load Washer.
What does Kenmore HE2 plus 5d mean?
The 5d code is actually an Sd code and it means suds have been detected in the washer. This can indicate to much soap or the wrong kind of soap was used in the washer. Be sure HE detergent is being used.
How do I fix error code 5d on Kenmore washer?
Straighten out the kink, replace the hose, and screw the top of the washer back on. This should clear the 5d error. You might want to run an empty test cycle to make sure the machine is now in working order.
What is F21 code on Kenmore washer?
@gwenr Error F21 is a Long Drain error. If the drain time exceeds 8 minutes this error code will be displayed. In addition, a “SUDS” error may also be displayed. This may be an indication of a drain pump problem and/or clog in the drain line.
How do I fix error code 5d?
Maytag acknowledges that error codes like “Sd” sometimes appear by mistake. Push the “Pause/Cancel” twice or “Power” button once to remove the code from the screen and try using the washer again. If the code returns, unplug the washer for 60 seconds and try the cycle again before calling for assistance.
What does 5d mean on a washer?
The 5d or excess suds error code usually indicates that there’s a problem with the detergent you’re using. And while it may not stop your washing machine from working, you still have to eliminate it to get the most out of your appliance.
What does 5d mean on your washer?
Did you receive an Sd (may appear as 5d) or Sud Error Code? If Sd or Sud (excess suds) appears in the display, you have excessive suds in washer. The washer is running a suds reduction routine. Allow the washer to continue. Use only HE (High Efficiency) detergent.
How do I fix error code F21 on Kenmore?
This may be an indication of a drain pump problem and/or clog in the drain line. Unplug your machine for 1/2 hour to see if the CCU will reset. If that is without result check the drain hose for kinks or if it is clogged. After that check the electrical connections to the pump and ensure the pump is running.
How do I fix Error 21 on my washing machine?
If your Whirlpool washer has an F21 error code, it indicates that your washer has a drainage problem. The good news is the issue can usually be resolved by simply clearing the drain filter or drain hose.