How do I copy a configuration file to a Cisco switch?

Telnet the first switch, copy the configuration on a simple text file using the show run command and paste it in the text file. Then connect to the new switch using a serial connection, go to the global configuration mode and paste the configuration to it. Alternatively you can use a TFTP server.

How do you save config on HPE switch?

There are three ways to save a new configuration:

1. In the CLI: Use the write memory command. This overwrites the current startup-config file with the contents of the current running-config file.
2. In the menu interface: Use the Save command.
3. In the WebAgent: Click Save.

How do I configure a Cisco Managed switch?

How to configure Cisco switch?

1. Initial command prompt “Switch>” appears on the screen.
2. Type “enable” next to it and press “Enter”.
3. This will take you into the “EXEC” mode, also known as the Global Configuration mode.
4. Go into configure mode using configure terminal.
5. Enter the configuration commands one per line.

How do I copy TFTP server startup-config?

Log in > Go to enable mode > issue a “copy running-config tftp”* command > Supply the IP address of the TFTP server > Give the backup file a name. Note: You can also use startup-config to copy the config saved in NVRAM rather than the running-config.

How do I paste into a Cisco config?

Paste the configuration file into the router by selecting Edit > Paste to Host on the HyperTerminal menu. After the configuration has finished pasting, and the router brings you back to the configuration prompt, issue the copy running-config startup-config command. This writes the configuration into memory.

How do I copy a configuration file from HP switch?

To copy a configuration file from a USB device to the switch:

1. Insert a USB device into the switch’s USB port.
2. Execute the following command: HP Switch# copy usb startup-config HP Switch-config.
3. At the prompt, press [Enter] to reboot the switch and implement the newly downloaded software.

How do you save a configuration on a Cisco router?

Save running config on Cisco device Use the command copy running-config startup-config (copy run start) to overwrite the current startup config file with what is currently in the running configuration file.

How do I save a Cisco running config?

How do I copy a configuration file from a TFTP server to a Cisco switch?

Click the Options tab .

1. Select List of commands to be entered on device and enter the following code: copy running tftp. 192.168.1.200.
2. Select Enter commands in enable mode .
3. Select Save device output to file .
4. Select Overwrite existing capture file .
5. Select Answer yes to any confirmation prompts .
6. Select Stop on error .

How do I save a switch configuration?

Save the Configuration Type “copy running-config startup-config” at the command line and press return on the keyboard. This will copy the current switch configuration to the non-volatile memory, which is memory that will retain its data even without power applied to it. 3.