How do I assign a static IP address to my Samsung printer?

Table of Contents

How to assign the printer a static IP address

Open SyncThru Web Service.
Select Network Settings at the top of the SyncThru page, and then click TCP/IPv4 on the left side of the Network Settings navigation menu.
Click the drop-down menu to change the IP Address Assignment Method field, from Automatically to Manually.

How do I make my printer IP address static?

Locate and click the “IP Configuration” option from the printer’s settings page. Find the “TCP/IP” or “IP Address Configuration” segment and moderate the option from “Auto” to “Static” or “Manual” In the fields provided, enter the static IP address you wish to assign to your printer.

How do I change my printer from DHCP to static IP?

To change your printer IP address, type its current IP address into the address bar of a web browser. Then go to the Settings or Network page and change your printer’s network to a static/manual IP address. Finally, type in the new IP address.

How do I print a configuration page for a Samsung printer?

If the printer does not have a front LCD panel, hold down the Stop, Cancel, or WPS button until the status LED begins a fast blink. This will cause the printer to print a configuration page.

Should I give my printer a static IP?

A static IP address for a network printer is also beneficial for travelers on the go. Under this approach, it’s possible to connect to the desired printer while out of the office or while using other internet connections.

Do printers need a static IP?

The default DHCP address range is typically between 100 and 156, so you’ll want to avoid all of the addresses between 192.168. 1.100 and 192.168. 1.156 when you’re assigning static IP addresses. Each printer must have its own unique static IP address.

Should a printer have a static IP address?

How do I assign a static IP address to my Epson printer?

Highlight your printer’s name, then click Configuration. Select Basic (under TCP/IP) and make sure Manual is selected. Enter the IP Address, Subnet Mask, and Default Gateway in the IP Address Setting section. Click Send.