How much bleach do I use for 1000 gallons of water?

Table of Contents

1 gallon
For laundry bleaches: 1 gallon is required for every 1000 gallons of water, and there are 1500 gallons of water in the well. Therefore, 1 ½ gallons of laundry bleach is required to disinfect this well.

How much chlorine does a 1000 gallon pool need?

If the water is clean and clear, then add about 3 oz of liquid chlorine per 1000 gallons of water – while the pool filter is running. This should give you a chlorine level of about 3 ppm.

How much HTH shock do I need for a 1000 gallon pool?

For example, HTH Super Shock! asks for one pound per 13,500 gallons. So for a 21-thousand gallon pool, you’d want to round up to two pounds of shock. Always round up to make sure your pool gets enough chlorine.

How much bleach do I put in a 10000 gallon pool?

Clorox itself recommends using between 100 and 200 ounces of regular-strength bleach per 10,000 gallons of pool water — one gallon is 128 ounces, and many bottles of bleach are available in one-gallon or half-gallon sizes. Pool professionals tend to recommend more conservative amounts of bleach.

How much bleach do I put in a 500 gallon pool?

In a clean, freshly filled 500 gallon wading pool, add a quarter cup of unscented household liquid chlorine bleach to the water. Then, at the end of each day, test the water and add an additional 1/8 to 1/4 cup, depending on the reading.

How long after putting bleach in pool Can you swim?

It is a good idea to wait at least 20 minutes after adding the water balancing chemicals. If you use calcium chloride in your pool, you should wait at least 2 hours to swim.

How much bleach do I add to my pool?

WADING POOL DISINFECTION When chlorinating wading pools, use 1/8 cup per 100 gallons of new water. Mix required amount of Clorox® Regular Bleach2 with 2 gallons of water and scatter over surface of pool. Mix uniformly with pool water.

Can I shock my pool with bleach?

If you need to calculate how much bleach or Clorox you need to shock your pool, you will have to use 1/2 gallon of bleach per 10,000 gallons of water to raise the chlorine levels by 5 ppm.

Can I use regular Clorox bleach in my pool?

It is important to know what exactly bleach is before you put it in your pool. Household bleach, Clorox and liquid chlorine can all be used to sanitize a pool. They are all types of chlorine. Household bleaches such as Clorox usually contain about 5-6% available chlorine, about half that of pool liquid chlorine.

Can I use bleach instead of chlorine in my pool?

Household bleach, Clorox and liquid chlorine can all be used to sanitize a pool. They are all types of chlorine. Household bleaches such as Clorox usually contain about 5-6% available chlorine, about half that of pool liquid chlorine. Household bleaches often have unwanted fragrances and colors.

Can you put bleach in a vinyl pool?

High concentrations of chlorine (above 1.5 ppm) will attack the liner and bleach it, thus damaging it. Any level below this range will weaken its ability to kill off bacteria.