Why does my LG washer keep saying error?

The LE error code means that the motor in your washing machine is locked. It’s usually due to a simple reason, like your washer is overloaded, but sometimes it can be a more serious issue that takes a lot more effort to fix.

How do I reset my LG washer error?

Follow these steps to reset your LG washer:

1. Press Power to turn the washer off.
2. Unplug the washer or disconnect the power from the circuit breaker box.
3. Press the Start/Pause button for approximately five seconds.
4. Restore power to the washer.

How do I fix error code LG top load washer?

An LG washer error code LE indicates that the washer’s motor is locked, usually due to a heavy wash load. Removing items from the washer or rebalancing the load and then resetting the washer should fix the problem and resolve the LE error code.

Where is error code on LG washer?

LG washer error codes appear on the control panel display when the control board detects a problem. Look up the code being signaled and follow the troubleshooting steps to fix the problem.

How do you clear a washing machine error?

Reset your washing machine What you can do instead is power cycle it: Unplug it (or turn off power at the circuit breaker), wait some time for the electrical charge to clear out of the washer (usually 1 to 5 minutes at most), and then power it up again. This is the closest you can get to a “reset” of the washer.

Why does my washer keep saying error?

Common appliance codes could be related to a problem with the door, a water heating sensor, a software or circuit board fault, a motor or pump fault plus much more. Simple things that could have an error code could be the door being left ajar on the machine or the detergent drawer not in situ properly.

How do I reset my LG Direct Drive washing machine?

To complete a power reset on your LG washer, unplug the machine from its power source. Wait at least five minutes before plugging the unit’s electrical cord back into the outlet. Unless there are other problems with the machine, the washing machine should reset.

How do you clear the CL code on a LG washing machine?

TO TURN OFF CL CODE ON NEWER LG FRONT LOAD WASHERS: To TURN OFF CHILD LOCK on your LG washer, press and hold the CHILD LOCK button for 3 to 5 seconds. The washer should now have CHILD LOCK mode DISABLED and all buttons will function properly.

How do I fix error code E21?

Resolution

1. Ensure the drain hose is in the correct position.
2. Ensure correct drain height.
3. Clean the pump and filter.
4. Check for a blocked drain.
5. Check the drainage hose for possible kink or twist.
6. Use less soap powder.
7. Switch off the power to the washing machine.
8. Contact an Authorised Service Center.

https://www.youtube.com/watch?v=qzG5Qj5vHDc